Chemical reactions

Chapter overview

1 week

This chapter builds on the brief introduction to chemical reactions that was covered in Chapter 1 (Atoms) of Gr. 8 Matter and Materials, specifically the paragraph Pure Substances. The important message of this chapter is that atoms are rearranged during a chemical reaction. The atoms do not change, but how they are arranged in relation to each other does change. That means that the molecules change, even though the number of each kind of atom present at the start of the reaction, stays the same throughout. To help learners make this important conceptual connection, particle diagrams are used to represent some of the reactions in this chapter. Learners will also be given an opportunity to draw such diagrams themselves in the activities and review questions of this chapter.

The activity 'Can we use a chemical reaction to see inside an egg?'takes a few days. It is suggested that you start with it during the first lesson of this chapter. It will help to show learners that chemical change is usually observable on the macroscopic scale and that macroscopic observations provide evidence of activity on the level of particles.

It is also a good idea to make the limewater needed for the investigation 'Can clear limewater be used to detect carbon dioxide?'before you start this chapter. To make clear limewater follow the instructions below:

Instructions for making clear limewater

  • Place a few tablespoons of calcium hydroxide, Ca(OH)2, in a clear 500 ml reagent bottle and fill with water. Shake or stir to make a cloudy suspension.

  • Leave the suspension to settle for a few days. The clear liquid above the solid Ca(OH)2 is a saturated solution of Ca(OH)2, also known as clear limewater.

  • Carefully decant as much of this as you need, without stirring up the solid Ca(OH)2 sludge at the bottom.

  • To make more, simply add more water, shake it up and let it settle again. When the sludge dissolves completely, simply add more solid Ca(OH)2.

3.1 How do we know a chemical reaction has taken place? (1.5 hours)

Tasks

Skills

Recommendation

Activity: The difference between physical and chemical changes

Accessing and recalling information, sorting and classifying,

Suggested

Activity: Can we use a chemical reaction to see inside an egg?

Observing, recording information, drawing and labelling, interpreting

CAPS suggested

3.2 Reactants and products (1.5 hours)

Tasks

Skills

Recommendation

Activity: Analysing the eggshell experiment

Interpreting, explaining chemical reaction

CAPS Suggested

Activity: Studying the fermentation reaction

Accessing and recalling information, interpreting

Optional

Activity: Some chemical reactions from Life and Living

Reinforcement, recalling information

CAPS suggested

Activity: Careers in chemistry

Accessing and recalling information, researching, reading and writing, communicating

Optional

  • What is a chemical reaction?
  • What happens to atoms and the bonds between them during a chemical reaction?
  • How can we identify the reactants and products of a reaction?
  • What examples of chemical reactions are there in indigenous practices?

In the last chapter we looked at the particle model of matter and specifically at changes of state. Do you remember heating and cooling candle wax to observe it melt and then solidify. The wax first changed from a solid into a liquid and then back to a solid again. These are physical changes. The chemical properties of the substance does not change.

We are now going to look at what happens when we get chemical changes in substances. These take place during chemical reactions.

How do we know a chemical reaction has taken place?

  • chemical reaction
  • reaction flask or
    reaction vessel

During a chemical reaction, one or more substances are changed into new substances. Do you know of any chemical reactions? Can you mention one or two examples?


Learners may remember that the rusting of iron is a chemical reaction, or they may cite some of the reactions from Chapter 1 as examples. Learners may also cite 'change of state' as a reaction. However, this is NOT a chemical reaction or change. Explain to your learners that it is only a physical change taking place not a chemical change.

How will we know when a chemical reaction is taking place? What are the signs?



Get learners to discuss this in small groups for a few minutes. Make a list on the board of all their suggestions which may include:

  • The mixture may change and appear different. (In what way? There may be a colour change and bubbles or 'crystals' may form.)
  • There may be an explosion.
  • The mixture may change temperature, heating up or cooling down. This is NOT to be confused with physical changes during heating and cooling when a substance melts or solidifies for example.

We can tell if a chemical reaction has taken place when one or more of the following things happen:

  • There has been a colour change inside the reaction flask.

  • A gas has formed. Usually we know a gas has formed when we can see bubbles. This should not be confused with boiling, which only happens when a liquid is heated to its boiling point.
  • A solid has formed. Usually we know that some solid material has formed when we can see a sludgy or cloudy deposit, or crystals forming.

Most practical manuals for introductory chemistry list only the three visual cues above as signs that a reaction has taken place. However, the non-visual signs below are also worth including here.

All the signs listed above are visual, or recorded by sight. That means we can see them. Our other senses can also help us to say whether or not there was a chemical reaction:

  • Sometimes chemical changes can be smelled, for instance when a new material, that has a strong smell, is formed.
  • Other chemical changes can be felt, e.g when the reaction produces heat.
  • Some chemical changes can be heard, e.g. when an explosion takes place.

Video on physical and chemical changes.

The difference between physical and chemical changes

This is a short activity to make sure that learners understand the difference between chemical and physical changes, and uses examples from everyday life.

INSTRUCTIONS:

Below is a table with some different chemical and physical changes listed.

You need to decide whether the change is physical or chemical and write the answer in the last column.

Change

Is it a physical or chemical change?

Cutting up potatoes into cubes

Boiling water in a pot on the stove

Frying eggs in a pan

Whipping egg whites

Dissolving sugar in water

Burning gas in a gas cooker

Your ice cream melts in the sun

Milk turning sour

An iron gate outside rusts

Here are the answers. Learners only need to state physical or chemical - some explanations have been provided as background for the teacher and if you wish to explain the changes further to your learners.

Change

Is it a physical or chemical change?

Cutting up potatoes into cubes

Physical

Boiling water in a pot on the stove

Physical

Frying eggs in a pan

Chemical (the egg proteins undergo a chemical change and crosslink to form a network)

Whipping egg whites

Physical (air is forced into the liquid but no new substance is made)

Dissolving sugar in water

Physical (the sugar grains are dispersed within the water, but the individual sugar molecules are unchanged)

Burning gas in a gas cooker

Chemical (water vapour and carbon dioxide form)

Your ice cream melts in the sun

Physical

Milk turning sour

Chemical (lactic acid is produced)

An iron gate outside rusts

Chemical (iron oxide forms - this will be discussed in more detail in Gr. 9)

We will now put our checklist into practice by looking at a reaction safe enough to try at home. Have you ever wondered what a raw egg would look like without its shell? We are going to use a chemical reaction to strip away the shell of an egg, without breaking the egg!

Can we use a chemical reaction to see inside an egg?

http://www.flickr.com/photos/gemsling/2687069763/
How can we make an egg look like this? http://www.flickr.com/photos/gemsling/2687069763/

Start with this activity as soon as possible, because it takes a few days for the eggshell to dissolve completely. It is probably worthwhile to do the reaction in duplicate in case something goes wrong with the experiment. The egg is very delicate without its shell and may break and then it would be good to have a 'backup' egg.

Video on the naked egg experiment

MATERIALS:

  • eggs
  • a glass
  • white vinegar

INSTRUCTIONS:

Carefully place the egg in the glass. Be careful not to crack the shell.

Cover the egg with vinegar. Wait a few minutes. Can you see anything happening on the surface of the eggshell?

  1. Write your observations below.


  2. What is this observation a sign of?


  1. The eggshell gradually becomes covered in bubbles.
  2. The bubbles are a sign of a chemical reaction taking place.

Leave the egg in the vinegar for 4 - 5 days. You should complete the rest of the activity after this.

Note: It may be necessary to top up the vinegar if the reaction starts to slow down. Remember to return to the activity at the end of the week, when the eggshell has dissolved completely.

After 4 to 5 days, look at the egg in the vinegar and write down your observations.



There is a foamy, brown layer floating on the vinegar.

Carefully scoop the egg out of the vinegar with a large spoon. Touch the surface of the egg. Write your observations below. What has happened to the shell?



The egg feels soft and wobbly. The shell disappeared because it has dissolved. In its place is a powdery coating.

Rub the powdery coating off the egg and place it in some clean water. What does it look like now?



The egg has lost its shell and we can see the egg white and the yolk inside.

Draw and label pictures of what the contents of the glass looked like before and after the reaction took place.









The learners must draw pictures of the experiment at the beginning and at the end. The first picture should show an intact egg in a glass, covered with clear liquid vinegar. The second picture should show a transparent egg, with the white and the yolk clearly annotated, submerged in clear liquid vinegar with a brown layer floating on top.

QUESTIONS:

What signs did you see that told you a chemical reaction had taken place?




The egg looks different. We also saw bubbles on the eggshell and afterwards there was a foamy, scummy layer floating on top of the vinegar.

Write a short paragraph to explain what happened to the eggshell.




The learner's paragraph should contain at least the following ideas:

  • The eggshell reacted with the vinegar and was 'eaten away'.
  • The eggshell dissolved in the vinegar.
  • The materials in the eggshell underwent a chemical change. They have changed into different materials.

Bones, teeth and pearls will all dissolve in vinegar, just like the eggshell did, even though these may take much longer.

How is it possible to change one compound into another? What happens to the particles when compounds react? In the next section we are going to answer these questions.

Reactants and products

  • reactant
  • product
  • chemical equation
  • coefficients
  • fermentation

In Chapter 1 we learnt that compounds are formed by chemical reactions. Can you remember what a compound is? Write a definition here.



A compound is a material that consists of atoms of two or more elements that are chemically bonded together in a fixed ratio. Encourage your learners to make a note of this in the margin of their workbook.

Write down the formulae of three different compounds.


Learner dependent answer. H2O, CO2, NaCl, etc.

Analysing the eggshell experiment

In the eggshell activity the calcium carbonate in the eggshell reacted with acetic acid and formed calcium acetate, carbon dioxide and water.

We can write this chemical equation as follows:

eggshell + vinegar → calcium acetate + carbon dioxide + water

QUESTIONS:

There are two starting substances before this chemical reaction takes place. What are they?


The eggshell (calcium carbonate) and vinegar (acetic acid).

There are three substances present after the reaction. What are these?


They are calcium acetate, carbon dioxide and water.

What are the chemical formulae for the compounds water and carbon dioxide?


Water is H2O and carbon dioxide is CO2.

We call the substances that are present before the chemical reaction has taken place, the reactants. What are the reactants of the eggshell experiment?


The eggshell (calcium carbonate) and vinegar (acetic acid).

What do you think happened to the reactants during the chemical reactions?


Use this to assess learner's understanding so far. They should mention that the reactants are used to make the products.

We call the substances that are produced during the chemical reaction, the products. What are the products of the eggshell experiment?


They are calcium acetate, carbon dioxide and water.

During a chemical reaction, the reactants are used to make the products. The atoms in the reactants have been rearranged into new compounds (the products).

A simulation about reactants, products and leftovers http://phet.colorado.edu/en/simulation/reactants-products-and-leftovers

Teacher's guide for the PhET simulation in the visit box. http://phet.colorado.edu/files/teachers-guide/reactants-products-and-leftovers-guide.pdf Simulations are a powerful tool and we encourage you to use them if you have access to the internet or encourage your learners to experiment with them outside of class. Learners can also access the site over their mobile phones by typing the bit.ly link into their address bar.

A chemical reaction is a rearrangement of atoms

Get your learners to do these reactions themselves on their desks in front of them using beads/peas/lentils/balls and rearrange the atoms to make the products.

In order to change a compound into a different compound, we need to change the way in which the atoms in the compound are arranged. This is exactly what a chemical reaction is: a rearrangement of atoms to turn one or more compounds into new compounds.

Any time atoms separate from each other and recombine into different combinations of atoms, we say a chemical reaction has occurred.

We are going to use coloured circles to represent the atoms in the compounds which take place in chemical reactions. If you still have your beads or playdough from previously, you can also make these reactions yourself on your desk. Look at the following diagram.

We have carbon and oxygen on the left of the arrow reacting to make carbon dioxide on the right of the arrow.

To the left of the arrow, we have the 'before' situation. This side represents the substances we have before the reaction takes place. They are called the reactants.

To the right of the arrow we have the 'after' situation. This side represents the substances that we have after the reaction has taken place. They are called the products.

REACTANTS (before the reaction) → PRODUCTS (after the reaction)

Do you see how the atoms have rearranged? This means a chemical reaction has taken place. Label the diagram with 'reactants' and 'product'.

The reaction between carbon and oxygen takes place when we burn coal. Coal is carbon and when it burns in oxygen gas, carbon dioxide is formed.

http://www.flickr.com/photos/cote/66570391/
Burning coal. http://www.flickr.com/photos/cote/66570391/

The diagram below represents another chemical reaction. We have oxygen (red molecules) reacting with hydrogen (white molecule) to produce water.

What are the reactants in this reaction?


Oxygen and hydrogen.

What is the product in this reaction?


Water.

Why do you think hydrogen and oxygen are represented as two atoms joined together?


This links back to what learners covered in Chapter 1 about diatomic molecules. These elements exist as diatomic molecules so they have two atoms joined together.

Do you remember when we spoke about chemical bonds between atoms in a molecule in Chapter 1? A chemical bond is a force which holds the atoms together. Therefore, during a chemical reaction, the bonds between atoms have to break so that the atoms can rearrange to form the products. New bonds form between the atoms in the product.

Next we will look at a chemical reaction that has been used by humankind for centuries.

Fermentation is a chemical reaction

Have you ever forgotten some milk or juice in a bottle, to find that it has 'gone off' a few days later? If you accidentally tasted it, it may have tasted sour and, in the case of the juice, a bit fizzy as well. Your senses may have warned you not to drink any more of it. Do you remember learning in Gr. 7 that our sense of taste protects us from food that has spoiled?

The sour taste of the milk or juice is caused by the products of fermentation. Which compounds have a sour taste?


Acids taste sour.

Fermentation does not only produce unwanted products. Yoghurt, buttermilk and cheese are all fermented milk products. In these examples, the fermentation process creates acids that give these foods a sour taste.

Different dairy products which are made using fermentation.

Fermentation is also the process by which a variety of fruits, vegetables and grains can be used to make alcohol. In many cultures the brewing of alcoholic drinks is part of their indigenous knowledge.

http://www.flickr.com/photos/nikonvscanon/4231775258/
Two buckets of ginger beer fermenting. http://www.flickr.com/photos/nikonvscanon/4231775258/

How fermentation works

The video on how fermentation works (5:39) is short and fun. The first two minutes give a brief description. During the rest of the video, the presenter demonstrates how to make your own ginger beer.

Studying the fermentation reaction

The basic reaction in the fermentation process can be summarised as follows:

glucose → alcohol + carbon dioxide

What are the reactants and products in this reaction?



Glucose is the reactant and alcohol and carbon dioxide are the products.

We can draw pictures of the molecules to show how the atoms are rearranged during the reaction:

In the diagram above, the grey atoms are carbon (C), the red atoms are oxygen (O) and the small, white ones are hydrogen (H). Write in the names of the compounds in this reaction.

Learners must write glucose on the left and alcohol and then carbon dioxide on the right.

Glucose does not change into alcohol and carbon dioxide by itself! Microorganisms like yeast and bacteria actively ferment glucose.

Yeast produce special chemicals called enzymes that can break down the bonds in sugars such as glucose to form smaller molecules like alcohol and carbon dioxide.

Learners would have first encountered bacteria in Gr. 7 Life and Living when studying biodiversity and the classification of organisms. They will look at microorganisms in more detail in Gr. 9 Life and Living.

In South Africa, a popular drink is ginger or pineapple beer! The fizzy bubbles in the ginger beer or pineapple beer are bubbles of carbon dioxide produced by the yeast during fermentation. Let's make some ginger beer!

This is an extension activity and can be performed if you have time in class. It may also be done as a project. We will also look at fermentation again in Matter and Materials next term. In fermentation, the glucose is incompletely broken down, so it yields less energy (in the form of ATP) than respiration. Fermentation is also anaerobic meaning it does not require oxygen, whereas respiration requires oxygen. Alcohol is produced during fermentation. However, ginger beer is non-alcoholic. Although it is called 'beer', it is not alcoholic because it is not fermented for long enough.

INSTRUCTIONS:

  1. You need to research how to make traditional South African ginger beer.
  2. Identify the different ingredients you will need.
  3. Once you have done so, you can decide as a class about the best recipe you will use. You can then make ginger beer in class with your teacher.
  4. Answer the questions that follow.

A recipe for ginger beer is provided here. Learner must also research their own recipe in groups and write out the best recipe that they have. You can then either choose one of their recipes to use, or use this one, or you can test different recipes to see which one works best.

A step-by-step guide on making ginger beer. http://whatsforsupper-juno.blogspot.com/2007/06/old-fashioned-home-made-ginger-beer.html

MATERIALS:

  • 6 - 8 medium size lemons

    • grated rind of 2 lemons
    • 250 ml (1 cup) of freshly squeezed lemon juice (from about 6 lemons)
  • 2 thumb-size pieces of fresh ginger
  • 2 teaspoons of dried powder ginger
  • 6 raisins
  • 750 ml (3 cups) white sugar
  • 5 litres of water
  • 1 x 10 g sachet of instant (active dry) yeast
  • grater
  • lemon squeezer
  • container or bucket
  • wooden spoon
  • large bottle
  • several smaller bottles with lids
  • balloons
  • rubber bands

INSTRUCTIONS:

  1. Grate the lemon rind from 2 lemons into a large container or bucket.
  2. Grate the fresh ginger as well using the coarse teeth of the grater.
  3. Squeeze out the juice from about 6 lemons. You will need 250 ml. Add the juice to the mixture.
  4. Add the dried ginger, raisins and sugar.
  5. Add 1 litre of hot water (not boiling) and stir for about 3 minutes until the sugar has completely dissolved.
  6. Add another 4 litres of warm water. Make sure the water is cool enough for you to hold a finger in it comfortably (otherwise the yeast will die!).
  7. Sprinkle the sachet of dried yeast over the top of the water and leave it for a few minutes.
  8. Stir everything with a wooden spoon.
  9. Pour the liquid into a large bottle and attach a balloon over the neck of the bottle. Secure the balloon to the neck with a thick rubber band.
  10. Place the bottle in a warm place but not in direct sunlight.
  11. Let it stand for approximately 4 - 5 hours.
  12. When the raisins float to the top the ginger beer is ready to drink.
  13. Strain the liquid through a sieve. Make sure you work over a basin or similar area.
  14. Pour the ginger beer into clean clear glass bottles and add a raisin to each bottle. Make sure that you do not fill the bottles completely but leave at least 7 - 10 cm between the liquid and the top of the bottle's neck.
  15. Attach a balloon to the necks of half of the bottles and secure these with rubber bands.
  16. Screw the lids onto the other half of the bottles.
  17. Store the bottles away from heat or sunlight. (They do not need to be in a warm place.)
  18. Leave it to stand overnight for at least 8 hours.
  19. Gentle unscrew the caps. The gas inside will want to escape so do this slowly and carefully.

QUESTIONS:

What are the reactants in the reaction to make ginger beer?


The chemical reaction occurs between sugar and fermenting fruit and the yeast. So the reactants are the sugar and fruit (ginger and raisins).

What is the product in the reaction taking place in the ginger beer?


The product is carbon dioxide (and a very small amount of alcohol).

Why are there fizzy bubbles in the ginger beer?


It is the carbon dioxide gas that is was trapped in the liquid.

Where do you think the gas came from?


It is a result of the chemical reaction between the yeast, the sugar and the fermenting fruit.

Another example of where we see a chemical reaction taking place is when we burn wood in a fire, either in our homes or to cook food. The wood burns and produces carbon dioxide gas and water vapour. What are the products and reactants in this reactions?



The reactants are the wood and oxygen, and the products are the carbon dioxide and water.

Chemical reactions can help us to detect certain substances

Some chemical reactions can produce results that are unique and even spectacular! Have you ever seen the volcano experiment? This experiment is shown in the video link in the visit box.

A video showing the ammonium dichromate volcano

When ammonium dichromate burns in oxygen, the reaction produces bright orange sparks. The reaction forms nitrogen gas (N2), water and a dark-green compound called chromium oxide as products. This reaction is unique. Only ammonium dichromate reacts with oxygen to form these particular products with these particular visual effects.

Ammonium dichromate before it is burned in oxygen.
Chromium oxide is the product.

When two substances react in a unique and characteristic way when they are mixed, one of them can be used to detect the other.

Some chemical reactions from Life and Living

This activity reinforces some concepts learned in the beginning of the year in Life and Living about respiration and photosynthesis. CAPS suggests doing the experiment again where you blow bubbles through lime water. We did this in Chapter 1 this year as an activity, but you can repeat it briefly here to show the results again if learners do not remember it well.

Do you remember we used clear lime water to detect carbon dioxide in our breath in Chapter 1 in Life and Living? What colour did the clear lime water turn when we blew bubbles through it?


It turned a milky white colour.

Limewater is a solution of calcium hydroxide in water. A reaction occurs between the lime water and the carbon dioxide to produce a white substance in the water called calcium carbonate. What are the reactants and products in this reaction?



The reactants are limewater (calcium hydroxide) and carbon dioxide and the products are calcium carbonate and water.

We say that we used the colour change of the lime water to detect the carbon dioxide in our breath. Carbon dioxide is the by-product of the chemical reaction that takes place during respiration in all organisms. Write a word equation for respiration.


glucose + oxygen → energy + carbon dioxide + water

In Life and Living we spoke about the ingredients of respiration as we had not yet learned the terms reactant and product. What are the reactants and what are the products in respiration?



The reactants are glucose and oxygen. The products are energy, carbon dioxide and water.

What are the reactants and products in photosynthesis?



The reactants are carbon dioxide and water, the products are glucose and oxygen.

We have also learnt that chemical reactions are simply rearrangements of atoms in molecules, to make different molecules. That is what many chemists do for a living! They find ways of rearranging atoms in order to make new compounds.

Careers in chemistry

This section is not for assessment purposes, and you may be inclined to leave it out. However, we strongly encourage you to give your learners the opportunity to discover the applications of what they are learning in class in the world around them, even if it as a homework exercise. It is very important for learners to realise that what they learn in class extends far beyond the walls of your classroom. Encourage them to be curious!

Natural sciences is all about discovery! We want to show you how the things you study in class are useful in the real world. This subject is much too big for us to learn everything about it in school. There are many different careers based in science that you can choose. Be curious about the world around you and explore it with your growing science knowledge!

Next year you will choose the subjects that you will be studying until Grade 12. Will you choose Physical Sciences, Life Sciences and Mathematics? Before you decide which subjects to take, explore what you can do with each of them after school.

Let's find out a bit more about the possibilities of fields related to what we have been studying in Matter and Materials.

Marie Curie (1867 - 1934) was a famous chemist and physicist, honoured specifically for her research on radioactivity. She was the first woman to win a Nobel Prize, the only woman to win in two fields and the only person yet to win a Nobel Prize in multiple sciences!

Many learners might wonder, what is the difference between a chemist and a chemical engineer?

A chemist studies the composition and properties of matter. They use the knowledge they gain to develop new compounds, products and processes to improve our daily lives. A chemist requires an extensive knowledge of chemistry and must be competent in a laboratory. Chemists often research chemical reactions to be able to produce new materials and compounds. These could be new medicines, innovative building materials, new fuels that do not harm the environment, and many others. Researching new chemical reactions is complicated. The work is often researched in teams with other scientists and engineers.

A chemical engineer is usually involved in developing ways to produce the new compounds developed by the chemist on a large scale or to find ways of lowering the cost of producing those compounds. A chemical engineer needs a general knowledge of chemistry but also needs to know a lot about processes and what drives them.

A researcher works to discover something new, or a new way of doing things, while an engineer optimises a known process or figures out the best way to make a known compound.

Invite a chemist/engineer: Do you know someone who is a chemist or a chemical engineer? Perhaps you live near a university? If you do, you could invite a chemist or engineer to come to your school and talk to your class about the work that chemists do. Alternatively, you could visit the chemist or engineer at their workplace and ask them to show you around. You could get your learners to prepare a few questions beforehand: you could ask them about their work, their training and what they think are the qualities needed if one wanted to become a chemist. Just remember to make an appointment first! This activity could be turned into a small group project. Learners could be required to write a short report on the information they have gathered. It is not for assessment purposes.

There are many, many applications and uses of chemistry, and many different careers make use of chemistry in some way. Let's find out.

Careers in chemistry

INSTRUCTIONS:

  1. Below is a list of different careers that all use chemistry in some way. Have a look through the list and then select the five careers you find most interesting.
  2. Do an internet search to find out what each career is.
  3. Write a one line description of this career.
  4. If there is a career that really interests you, draw a smiley face next to it and be sure to do some extra reading around the topic and where chemistry might take you! Find out what level of chemistry you will need for this particular career.
  5. There are many other careers besides the ones listed here which use chemistry in some way, so if you know of something else which is not listed here and it interests you, follow your curiosity and discover the possibilities!

Some careers involving chemistry:

  • Agricultural chemistry
  • Biochemistry
  • Biotechnology
  • Chemical education/teaching
  • Chemistry researcher
  • Environmental chemistry
  • Forensic science
  • Food science/technology
  • Geneticist
  • Geochemistry
  • Materials science
  • Medicine and medicinal chemistry
  • Oil and petroleum industry
  • Organic chemistry
  • Oceanography
  • Patent law
  • Pharmaceuticals
  • Space exploration
  • Zoology

Your descriptions of the careers you are interested in:











Summary

  • During chemical reactions, materials are changed into new materials with new chemical and physical properties.
  • The materials we start with are called reactants and the new materials that form are called products.
  • During chemical reactions, atoms are rearranged. This requires that chemical bonds in the reactants are broken and that new bonds are formed, resulting in product formation.
  • Fermentation in brewing is an example of a chemical reaction that is also part of indigenous knowledge.

Concept map

Revision questions

Suppose you mix some chemicals in a beaker. How will you know if a reaction has taken place? Write a paragraph describing each of the signals that would indicate a reaction has taken place and what each signal tells you about that reaction. [6 marks]







Learner's answer should contain all of the ideas below:

We know a chemical reaction has taken place when one or more of the following occurs:

  • There has been a colour change inside the reaction flask.
  • A gas has formed. Usually we know a gas has formed when we can see bubbles.
  • A solid has formed. Usually we know that some solid material has formed when we can see a sludgy or cloudy deposit, or crystals forming.

Non-visual signs that help us to say whether or not there was a chemical reaction include:

  • Sometimes chemical changes can be smelled, for instance when a new material is formed that has a strong smell.
  • Other chemical changes can be felt, for instance when the reaction causes heat to be released.
  • Some chemical changes can be heard, for instance when an explosion takes place.

Write your own definition for what a reactant is. [1 mark]



Learners should mention that the reactants are those substances that are present before a chemical reaction has taken place. They react to form the products.

Write your own definition for what a product is. [1 mark]



Learners should mention that the products are the substances that form during a chemical reaction. They are present at the end of a chemical reaction.

Explain what happens to the bonds between atoms in the reactants and products in a chemical reaction. [2 marks]



Chemical bonds break between atoms in the reactants and new bonds form between atoms in the products.

  1. Methane gas (CH4) is a natural fuel gas that burns in oxygen gas to produce carbon dioxide and water. The reaction can be represented by the following diagram:

    Key:

    Carbon atoms (C): black

    Oxygen atoms (O): red

    Hydrogen atoms (H): white

    Use the diagram and the 'key' below it to write formulae for each of the substances in the reaction. [4 marks]

    Name of compound

    Formula

    Methane

    Oxygen gas

    Carbon dioxide

    Water

    Name of compound

    Formula

    Methane

    CH4

    Oxygen gas

    O2

    Carbon dioxide

    CO2

    Water

    H2O

    What are the reactants of the above reaction? [2 marks]


    Methane (CH4) and oxygen (O2)

    What are the products of the above reaction? [2 marks]


    Water (H2O) and carbon dioxide (CO2)

    Write the names of the reactants and products under the colourful picture representations of each of the molecules. [2 marks]

    The equation should read as follows: methane + oxygen → carbon dioxide + water.

  1. Ammonia (NH3) is produced from hydrogen gas and nitrogen gas.

    Draw one molecule of each of the substances in the reaction in the following table. [3 marks]

    Name of compound

    Diagram of one molecule of the compound

    Hydrogen gas, H2

    Nitrogen gas, N2

    Ammonia, NH3

    The colours shown here are just a suggestion; what is important is that atoms of the same type should be the same size and colour, and the relative sizes of the atoms should reflect the fact that an H atom is smaller than an N atom.

    Name of compound

    Diagram of one molecule of the compound

    Hydrogen gas, H2

    Nitrogen gas, N2

    Ammonia, NH3

    Use the template below to draw diagrams representing the particles before and after the reaction. Your diagram should also show how many of each type of particle take part in the reaction. [4 marks: 2 marks each for 'before' (left) and 'after' (right) sketch]

    An example of what learners should produce.

    What are the reactants of the above reaction? [2 marks]


    Hydrogen and nitrogen.

    What is the product of the above reaction? [1 mark]


    Ammonia.

Look at the following photo which shows a test tube with milky limewater. What gas must have been bubbled through it to make it turn milky? [1 mark]

http://www.flickr.com/photos/tessawatson/379270115/
Lime water that has turned milky in a test tube. http://www.flickr.com/photos/tessawatson/379270115/


Carbon dioxide.

What are the reactants in this chemical reaction? [1 mark]

Limewater (calcium hydroxide) and carbon dioxide.

Total [32 marks]