Home Practice
For learners and parents For teachers and schools
Textbooks
Full catalogue
Leaderboards
Learners Leaderboard Classes/Grades Leaderboard Schools Leaderboard
Pricing Support
Help centre Contact us
Log in

We think you are located in United States. Is this correct?

20.2 Graphical representation of vectors

20.2 Graphical representation of vectors (ESAGK)

Vectors are drawn as arrows. An arrow has both a magnitude (how long it is) and a direction (the direction in which it points). The starting point of a vector is known as the tail and the end point is known as the head.

3f4fdd991bfe1fc39712f43d323b6f5f.png

Figure 20.1: Examples of vectors

832bbda747525b4970ddc92fc65e5c24.png

Figure 20.2: Parts of a vector

Directions (ESAGL)

There are many acceptable methods of writing vectors. As long as the vector has a magnitude and a direction, it is most likely acceptable. These different methods come from the different methods of representing a direction for a vector.

Relative directions

The simplest way to show direction is with relative directions: to the left, to the right, forward, backward, up and down.

Compass directions

Another common method of expressing directions is to use the points of a compass: North, South, East, and West. If a vector does not point exactly in one of the compass directions, then we use an angle. For example, we can have a vector pointing \(\text{40}\)\(\text{°}\) North of West. Start with the vector pointing along the West direction (look at the dashed arrow below), then rotate the vector towards the north until there is a \(\text{40}\)\(\text{°}\) angle between the vector and the West direction (the solid arrow below). The direction of this vector can also be described as: W \(\text{40}\)\(\text{°}\) N (West \(\text{40}\)\(\text{°}\) North); or N \(\text{50}\)\(\text{°}\) W (North \(\text{50}\)\(\text{°}\) West).

f6ee959ed70388fff15b5dffa960129a.png

Bearing

A further method of expressing direction is to use a bearing. A bearing is a direction relative to a fixed point. Given just an angle, the convention is to define the angle clockwise with respect to North. So, a vector with a direction of \(\text{110}\)\(\text{°}\) has been rotated clockwise \(\text{110}\)\(\text{°}\) relative to North. A bearing is always written as a three digit number, for example \(\text{275}\)\(\text{°}\) or \(\text{080}\)\(\text{°}\) (for \(\text{80}\)\(\text{°}\)).

f9a01c2bce11295d3b9c8342a8540d71.png

Scalars and vectors

Textbook Exercise 20.2

Classify the following quantities as scalars or vectors:

  1. \(\text{12}\) \(\text{km}\)

  2. \(\text{1}\) \(\text{m}\) south

  3. \(\text{2}\) \(\text{m·s$^{-1}$}\), \(\text{45}\)\(\text{°}\)

  4. \(\text{075}\)\(\text{°}\), \(\text{2}\) \(\text{cm}\)

  5. \(\text{100}\) \(\text{km·h$^{-1}$}\), \(\text{0}\)\(\text{°}\)

Solution not yet available

Use two different notations to write down the direction of the vector in each of the following diagrams:

2791676638581832d993d58764255a0f.png
Solution not yet available

Drawing vectors (ESAGM)

In order to draw a vector accurately we must represent its magnitude properly and include a reference direction in the diagram. A scale allows us to translate the length of the arrow into the vector's magnitude. For instance if one chooses a scale of \(\text{1}\) \(\text{cm}\) = \(\text{2}\) \(\text{N}\) (\(\text{1}\) \(\text{cm}\) represents \(\text{2}\) \(\text{N}\)), a force of \(\text{20}\) \(\text{N}\) towards the East would be represented as an arrow \(\text{10}\) \(\text{cm}\) long pointing towards the right. The points of a compass are often used to show direction or alternatively an arrow pointing in the reference direction.

d822bcf5685d4792695293a5534c37ab.png

Method: Drawing Vectors

  1. Decide upon a scale and write it down.

  2. Decide on a reference direction

  3. Determine the length of the arrow representing the vector, by using the scale.

  4. Draw the vector as an arrow. Make sure that you fill in the arrow head.

  5. Fill in the magnitude of the vector.

Worked example 1: Drawing vectors 1

Draw the following vector quantity: \(\vec{v} = \text{6}\text{ m·s$^{-1}$}\) North

Decide on a scale and write it down.

\(\text{1}\) \(\text{ cm}\) = \(\text{2}\) \(\text{m·s$^{-1}$}\)

Decide on a reference direction

d36a8b7028381e67f45f62539e91b613.png

Determine the length of the arrow at the specific scale.

If \(\text{1}\) \(\text{cm}\) = \(\text{2}\) \(\text{m·s$^{-1}$}\), then \(\text{6}\) \(\text{m·s$^{-1}$}\) = \(\text{3}\) \(\text{cm}\)

Draw the vector as an arrow.

Scale used: \(\text{1}\) \(\text{cm}\) = \(\text{2}\) \(\text{m·s$^{-1}$}\)

8de51f8849b054eaeb2292bb7e5f1a31.png

Worked example 2: Drawing vectors 2

Draw the following vector quantity: \(\vec{s} = \text{16}\text{ m}\) east

Decide on a scale and write it down.

\(\text{1}\) \(\text{cm}\) = \(\text{4}\) \(\text{m}\)

Decide on a reference direction

d36a8b7028381e67f45f62539e91b613.png

Determine the length of the arrow at the specific scale.

If \(\text{1}\) \(\text{cm}\) = \(\text{4}\) \(\text{m}\), then \(\text{16}\) \(\text{m}\) = \(\text{4}\) \(\text{cm}\)

Draw the vector as an arrow

Scale used: \(\text{1}\) \(\text{cm}\) = \(\text{4}\) \(\text{m}\)

Direction = East

052f1da002675105035efe2037b75506.png

Drawing vectors

Textbook Exercise 20.3

Draw each of the following vectors to scale. Indicate the scale that you have used:

  1. \(\text{12}\) \(\text{km}\) south

  2. \(\text{1,5}\) \(\text{m}\) N \(\text{45}\)\(\text{°}\) W

  3. \(\text{1}\) \(\text{m·s$^{-1}$}\), \(\text{20}\)\(\text{°}\) East of North

  4. \(\text{50}\) \(\text{km·h$^{-1}$}\), \(\text{085}\)\(\text{°}\)

  5. \(\text{5}\) \(\text{mm}\), \(\text{225}\)\(\text{°}\)

Solution not yet available